ELECTRICAL · 01Cable Glands & Accessories
Industrial and Ex-certified cable glands for armoured and unarmoured cable, with lock nuts, earth tags, shrouds, adaptors and stopping plugs.
Ex d / Ex eIP66 / IP68Brass / SS316
PRODUCTS · ELECTRICAL ACCESSORIES · SUPPLIER & STOCKIST · UAE
Industrial Electrical Supply Partner for EPC & Energy Infrastructure
Gasify Middle East supplies cable glands, cable trays and ladders, conduits and fittings, junction boxes and enclosures, power, control and instrumentation cables, lugs and terminations, and earthing materials from Abu Dhabi and Dubai. Industrial and Ex-certified products to IEC, ATEX and IECEx requirements, supplied against your MTO or datasheet with certificates and traceability.
Built for project procurement: we match each item to the area classification, cable and enclosure, confirm sources against your project specification, and support ADNOC, Saudi Aramco and other client-specification enquiries across the UAE, GCC, Middle East, Africa and South Asia.
IEC 60079ATEX / IECExEN 62444IEC
61537IEC 60502-1BS 5467IEC 62305EN 10204 3.1
01 / ELECTRICAL RANGE
Environment-Rated Accessories Engineered to Your Cable Specifications
From Ex cable glands and junction boxes to trays, cables, lugs and earthing, sourced against area classification, standard and project specification.
ELECTRICAL · 01
ELECTRICAL · 02Cable Trays, Ladders & Supports
Perforated trays, ladder racks, wire mesh trays and support systems in galvanised, stainless steel, aluminium and GRP.
Ladder / perforatedHDG / SS316 / GRPIEC 61537
ELECTRICAL · 03Conduits & Conduit Fittings
Rigid steel, flexible and PVC conduit with couplings, bends, boxes and sealing fittings for exposed wiring runs.
Rigid GIFlexibleEx seals
ELECTRICAL · 04Junction Boxes & Enclosures
Terminal and junction boxes, control stations and enclosures in GRP, stainless steel and aluminium, with Ex e, Ex d and Ex i options.
Ex e / Ex d / Ex iGRP / SS / AluIP66
ELECTRICAL · 05Power, Control & Instrumentation Cables
LV armoured power cables, control cables and screened instrumentation cables, including LSZH and fire-resistant types.
XLPE / SWALSZHFire resistant
ELECTRICAL · 06Lugs, Connectors & Terminations
Crimp and bimetallic lugs, connectors, terminal blocks, heat-shrink sleeves, cable ties and cable markers.
Crimp lugsBimetallicTerminals
ELECTRICAL · 07Earthing & Lightning Protection
Earth rods, copper tape, clamps, exothermic weld kits, inspection pits and lightning protection components.
Earth rodsCopper tapeIEC 62305
ELECTRICAL · 08Hazardous-Area Lighting & Power Accessories
Ex-certified LED luminaires, plugs, sockets, switches and small power distribution items, sourced to the area classification on enquiry.
Ex LEDPlugs / socketsATEX / IECEx
02 / SPECIFICATIONS
Product data tables and standard compliance.
Typical supply ranges. Availability depends on product, size, rating and quantity, and is confirmed for every RFQ.
| Product | Standard | Material / type | Size & rating | Typical use |
|---|---|---|---|---|
| Industrial cable gland, armoured (BW / CW) | EN 62444; BS 6121 | Nickel-plated brass, stainless steel 316, aluminium | M16 to M100, PG, NPT or BSP threads; IP66 / IP68 | Termination of SWA and braided cable in non-hazardous areas |
| Industrial cable gland, unarmoured | EN 62444 | Nickel-plated brass, SS316, nylon | M12 to M63; IP66 / IP68 | Control and instrument cable entries |
| Ex d (flameproof) cable gland | IEC 60079-0 / -1; EN 62444 | Nickel-plated brass, SS316; barrier type for Ex d | M20 to M100, NPT; Ex db IIC Gb (typical) | Zone 1 and Zone 2 flameproof enclosures |
| Ex e (increased safety) cable gland | IEC 60079-0 / -7; EN 62444 | Nickel-plated brass, SS316, polyamide | M20 to M100, NPT; Ex eb IIC Gb (typical) | Zone 1 and Zone 2 junction and terminal boxes |
| Dust-ignition proof cable gland | IEC 60079-31 | Brass, SS316 | IP66 / IP68; Ex tb IIIC Db (typical) | Zone 21 and Zone 22 dust areas |
| Cable gland with compression seal for lead or marine cable | BS 6121; manufacturer standard | Brass, SS316 | Per cable OD | Marine and offshore cables |
| Gland accessories | Manufacturer standard | Brass, SS, nylon, EPDM | Lock nuts, earth tags, shrouds, entry thread adaptors, reducers, stopping plugs, blanking plugs | Completing and sealing cable entries |
State cable OD, armour type, thread (metric, NPT, PG or BSP), protection type, gas group, zone and material in the RFQ. The gland certificate and the enclosure certificate must both cover the installation.
| Product | Standard | Material / type | Size & rating | Typical use |
|---|---|---|---|---|
| Perforated cable tray | IEC 61537; NEMA VE 1 | HDG steel (ISO 1461), SS316, aluminium, GRP | Width 50 to 900 mm; depth 25 to 150 mm | Medium cable loads and good ventilation |
| Ladder cable tray | IEC 61537; NEMA VE 1 | HDG steel, SS316, aluminium, GRP | Width 150 to 900 mm; depth 50 to 150 mm | Heavy power cable runs and long spans |
| Wire mesh cable tray | IEC 61537 | Pre-galvanised, HDG, SS316 | Width 50 to 600 mm | Light-duty, data and commercial runs |
| Trunking and cable duct | IEC 61084 | Steel, PVC | Per profile | Enclosed routing of small cable bundles |
| Tray fittings | IEC 61537 | As per tray | Bends, tees, crosses, reducers, risers, couplers and covers | Changes in direction, branches and covers |
| Support systems and strut channel | Manufacturer standard | HDG, SS316, GRP | Strut channel, brackets, hangers, base plates, threaded rod | Mounting trays, conduit and equipment |
| Cleats and cable ties | IEC 61914; manufacturer standard | SS316, PA66, HDG steel | Per cable OD | Securing cables on trays and structures |
Tray load class, span, finish and cover requirements follow the manufacturer's load table. State width, depth, thickness and finish in the RFQ.
| Product | Standard | Material / type | Size & rating | Typical use |
|---|---|---|---|---|
| Rigid steel conduit (GI) | IEC 61386-21; ANSI C80.1 | Galvanised steel; threaded ends to ASME B1.20.1 | 1/2 in to 6 in (20 to 150 mm) | Mechanical protection of exposed wiring |
| IMC / EMT conduit | ANSI C80.6 / C80.3 | Galvanised steel | 1/2 in to 4 in | Lighter-duty indoor runs |
| Flexible metallic conduit and liquid-tight conduit | IEC 61386-23; UL 360 | GI, SS316, PVC jacketed | 1/2 in to 4 in | Final connections to motors and instruments |
| PVC rigid conduit | IEC 61386-21 | PVC | 16 to 63 mm | Non-corrosive, buried and concealed runs |
| Conduit fittings | IEC 61386; manufacturer standard | GI, aluminium, SS316, PVC | Couplings, elbows, tees, boxes, unions, clamps | Completing conduit systems |
| Ex conduit seals and drains | IEC 60079-1; manufacturer standard | Cast aluminium, SS316, GI | Sealing fittings with compound; drain and breather | Ex d conduit systems and zone boundary sealing |
Include conduit type, size, thread standard, finish and the required seals or drains at hazardous area boundaries.
| Product | Standard | Material / type | Size & rating | Typical use |
|---|---|---|---|---|
| Ex e terminal and junction box | IEC 60079-0 / -7 | GRP, stainless steel 316, aluminium (copper-free or low copper) | Sizes per datasheet; IP66; Ex eb IIC Gb | Zone 1 and Zone 2 field junctions |
| Ex d flameproof enclosure | IEC 60079-0 / -1 | Cast aluminium, SS316 | Per datasheet; IP66; Ex db IIC Gb | Zone 1 instrument, switch and starter housings |
| Ex i intrinsically safe junction box | IEC 60079-0 / -11 | GRP or SS316; blue enclosure | Per datasheet; IP66 | Intrinsically safe loops in Zone 0, 1, 2 |
| Control stations and push buttons | IEC 60079; IEC 60947-5-1 | GRP, SS316, aluminium | Single and multi-way | Local start, stop and emergency stop |
| Industrial junction box, non-Ex | IEC 62208; IEC 60529 | GRP, SS316, polycarbonate, mild steel | IP66 / IP67; NEMA 4X | Safe areas and utility junctions |
| Ex luminaire, LED | IEC 60079; IEC 60598 | Aluminium, SS316; glass diffuser | Ex db / eb / mb; IP66 / IP67 | Area lighting and emergency lighting in hazardous areas |
| Plugs, sockets and switches, Ex and industrial | IEC 60309; IEC 60079 | Aluminium, SS316, GRP, polyamide | 16 A to 125 A; 2P+E, 3P+E, 3P+N+E | Portable tool and maintenance power |
State the Ex protection type, gas group, temperature class, zone, IP rating and entry details. Ex equipment is supplied with the manufacturer's certificate, and Gasify does not certify equipment itself.
| Product | Standard | Material / type | Size & rating | Typical use |
|---|---|---|---|---|
| LV power cable, XLPE / SWA / PVC | IEC 60502-1; BS 5467 | Cu or Al conductor; XLPE insulation; SWA armour; PVC sheath | 0.6/1 kV; 1.5 to 400 mm²; 1 to 5 core | Power distribution to motors, panels and loads |
| LV power cable, XLPE / SWA / LSZH | BS 6724; IEC 60502-1 | Cu or Al conductor; XLPE; SWA; LSZH sheath | 0.6/1 kV; 1.5 to 400 mm² | Enclosed areas, offshore and public buildings |
| Fire-resistant cable | IEC 60331; BS 7846 | Cu conductor, mica tape, XLPE, LSZH | 0.6/1 kV; per size | Emergency lighting, fire alarm and life-safety circuits |
| Control cable, multicore | IEC 60502-1; client specification | Cu stranded conductor, XLPE or PVC, SWA | 1.5 and 2.5 mm²; up to 61 core | Motor control and signalling |
| Instrumentation cable, pairs / triads | EN 50288; client specification | Cu conductor, individual and overall screen, SWA, PVC or LSZH | 0.5 to 1.5 mm²; 1 to 48 pairs | Analogue and digital field signals |
| Flexible and trailing cable | IEC 60245; IEC 60227 | Cu flexible conductor, rubber or PVC | 0.75 to 240 mm² | Portable equipment and mobile machinery |
| Medium voltage cable | IEC 60502-2 | Cu or Al, XLPE, screened and armoured | 3.6/6 kV to 18/30 kV | MV distribution on enquiry |
State the voltage grade, conductor material and size, number of cores or pairs, armour, sheath type, fire performance and drum length. Cable is supplied on drums and cut to length on enquiry.
| Product | Standard | Material / type | Size & rating | Typical use |
|---|---|---|---|---|
| Copper tubular crimp lug | DIN 46235; IEC 61238-1 | Tinned electrolytic copper | 6 to 630 mm²; M5 to M20 stud | Terminations on copper conductors |
| Bimetallic lug (Al to Cu) | IEC 61238-1 | Aluminium barrel, copper palm | 16 to 400 mm² | Aluminium conductors onto copper busbars |
| Pin and ferrule terminals | DIN 46228 | Tinned copper, insulated and bare | 0.5 to 50 mm² | Control and instrument wiring |
| Terminal blocks | IEC 60947-7-1 | Polyamide, brass or copper | 2.5 to 240 mm² | Terminal strips in panels and junction boxes |
| Heat-shrink sleeves and cable markers | Manufacturer standard | Cross-linked polyolefin | Per cable OD | Insulation, sealing and identification |
| Earth rods and accessories | IEC 62561-2; BS 7430 | Copper-bonded steel, SS, solid copper | 3/4 in x 3 m typical; 14 to 25 mm dia | Earth electrodes for grounding grids |
| Copper tape, clamps and exothermic welds | IEC 62561; IEEE 80 | Bare copper tape, bronze clamps, exothermic moulds | 25 x 3 mm to 50 x 6 mm | Earthing grid conductors and joints |
| Lightning protection air terminals and conductors | IEC 62305; IEC 62561 | Copper, aluminium, galvanised steel, SS | Rods, down conductors, test joints | Structure lightning protection systems |
Match lug barrel size to conductor cross-section and palm hole to the stud size. Use bimetallic parts where aluminium meets copper.
Protection types
| Marking | Protection type | How it works | Typical zones |
|---|---|---|---|
| Ex d | Flameproof enclosure | Contains an internal explosion and prevents flame transmission | Zone 1, 2 (Gb); gas |
| Ex e | Increased safety | Prevents arcs, sparks and hot surfaces | Zone 1, 2 (Gb); gas |
| Ex i (ia / ib / ic) | Intrinsic safety | Limits energy so the circuit cannot ignite the atmosphere | ia: Zone 0, 1, 2 (Ga); ib: Zone 1, 2 (Gb); ic: Zone 2 (Gc) |
| Ex n / Ex ec | Non-sparking | Not-incendive operation in normal conditions | Zone 2 (Gc); gas |
| Ex p | Pressurisation | Protective gas keeps the atmosphere out | Zone 1, 2; gas |
| Ex m | Encapsulation | Encloses parts in compound | Zone 0, 1, 2 depending on level |
| Ex t | Dust protection by enclosure | Dust-tight enclosure with surface temperature limit | Zone 20, 21, 22 (Da, Db, Dc); dust |
Reading Ex, IP and IK markings
| Item | Values | Notes | ||
|---|---|---|---|---|
| Gas group | IIA (propane), IIB (ethylene), IIC (hydrogen, acetylene) | IIC covers IIB and IIA; IIB covers IIA | ||
| Temperature class | T1 450 °C, T2 300 °C, T3 200 °C, T4 135 °C, T5 100 °C, T6 85 °C | Surface temperature must stay below the gas auto-ignition temperature | ||
| Equipment protection level (EPL) | Ga, Gb, Gc (gas); Da, Db, Dc (dust); Ma, Mb (mines) | Maps to the zone in which equipment may be used | ||
| Zones | Zone 0, 1, 2 (gas); Zone 20, 21, 22 (dust) | Set by the area classification drawing | ||
| Ingress protection (IP) | IP65 dust-tight and jet-proof; IP66 powerful jets; IP67 temporary immersion; IP68 continuous immersion | IEC 60529 | ||
| Impact protection (IK) | IK07 (2 J), IK08 (5 J), IK09 (10 J), IK10 (20 J) | IEC 62262 | ||
| Marking example | Ex db eb IIC T6 Gb IP66 | Certificate number ends with X when special conditions of use apply | ||
General guide only. The area classification drawing and the equipment certificates decide what is suitable for each zone.
| Cross-section | Max DC resistance, Cu at 20 °C (Ω/km) | Cu at 90 °C (Ω/km) | Al at 90 °C (Ω/km) |
|---|---|---|---|
| 1.5 mm² | 12.1 | 15.429 | 25.597 |
| 2.5 mm² | 7.41 | 9.448 | 15.676 |
| 4 mm² | 4.61 | 5.878 | 9.752 |
| 6 mm² | 3.08 | 3.927 | 6.516 |
| 10 mm² | 1.83 | 2.333 | 3.871 |
| 16 mm² | 1.15 | 1.466 | 2.433 |
| 25 mm² | 0.727 | 0.927 | 1.538 |
| 35 mm² | 0.524 | 0.668 | 1.109 |
| 50 mm² | 0.387 | 0.493 | 0.819 |
| 70 mm² | 0.268 | 0.342 | 0.567 |
| 95 mm² | 0.193 | 0.246 | 0.408 |
| 120 mm² | 0.153 | 0.195 | 0.324 |
| 150 mm² | 0.124 | 0.158 | 0.262 |
| 185 mm² | 0.0991 | 0.126 | 0.210 |
| 240 mm² | 0.0754 | 0.096 | 0.160 |
| 300 mm² | 0.0601 | 0.077 | 0.127 |
Copper values are the maximum DC resistance of plain copper class 2 conductors in IEC 60228. The 90 °C values apply a temperature coefficient of 0.00393 for copper and 0.00403 for aluminium, and aluminium also uses a 1.65 resistivity ratio. These are the values the voltage drop calculator uses.
03 / MATERIALS & FINISHES
Environment-matched materials and corrosion protection.
The Gulf's coastal, humid and dusty conditions make material and finish as important as the rating.
| Material | Typical products | Suitable for | Notes |
|---|---|---|---|
| Nickel-plated brass | Cable glands, adaptors, plugs | Industrial and onshore areas | Good general corrosion resistance, not for heavy marine or chemical exposure |
| Stainless steel 316 / 316L | Glands, enclosures, trays, clamps, fittings | Offshore, coastal, chemical and washdown | Higher cost, best corrosion resistance for the Gulf environment |
| Aluminium (copper-free or low copper) | Enclosures, luminaires, glands, trays | Industrial and Ex enclosures | Lightweight, suited to Ex when the alloy limits for the zone are met |
| Hot-dip galvanised steel (ISO 1461) | Trays, ladders, support steel, conduit | Outdoor and industrial areas | Zinc coating protects steel, cut edges need touch-up |
| GRP (glass-reinforced polyester) | Enclosures, trays, supports | Corrosive, coastal and chemical areas | Non-conductive, needs UV stabilisation and anti-static grades in Ex areas |
| PVC and polyamide | Conduit, glands, junction boxes | Non-hazardous indoor and light outdoor use | Limited temperature and UV resistance, not for Ex equipment unless certified |
| Copper and bimetallic | Lugs, earth rods, tape, bars | Conductors and earthing | Use bimetallic parts where aluminium and copper meet |
General guidance only. The corrosivity category, hazardous area classification and project specification decide the final material.
04 / ELECTRICAL SELECTION GUIDE
Precision matching from cable to enclosure.
A quick reference for common electrical needs. Final selection follows the project specification, area classification drawings and cable schedule.
| Installation need | Product | Typical material | Standard | Notes |
|---|---|---|---|---|
| Terminate armoured cable at a non-hazardous junction box | IP66 / IP68 armoured cable gland with earth tag | Nickel-plated brass or SS316 | EN 62444 | Match thread, cable OD and armour type (BW or CW) |
| Terminate cable at a Zone 1 or Zone 2 enclosure | Ex d or Ex e certified gland, matching the enclosure protection | Brass or SS316 | IEC 60079-0 / -1 / -7 | The gland certificate and the enclosure certificate must both permit the entry |
| Offshore or coastal area with salt spray | SS316 or GRP enclosures, SS316 trays and glands | SS316, GRP | ISO 12944 C5; IEC 61537 | Avoid mixing dissimilar metals, which causes galvanic corrosion |
| Heavy power cable run over long span | HDG ladder tray with covers and supports | HDG steel | IEC 61537 | Check the load and span against the manufacturer's load table |
| Mechanical protection on a short exposed run | Rigid GI conduit with fittings | GI steel | IEC 61386; ANSI C80.1 | Use Ex seals at zone boundaries and enclosure entries |
| Field instrument junction in a hazardous area | Ex e junction box, or Ex i box for intrinsically safe loops | GRP, SS316 | IEC 60079-7 / -11 | Keep Ex i cabling separate from non-Ex i wiring |
| Power distribution to motors and panels | XLPE / SWA / PVC cable, 0.6/1 kV | Cu or Al | IEC 60502-1; BS 5467 | Size for current, voltage drop and short circuit |
| Enclosed area, offshore or public building | LSZH cable | Cu, XLPE, LSZH | BS 6724; IEC 60332 | Low smoke and low halogen emission in fire |
| Life-safety circuits that must work in a fire | Fire-resistant cable and fire-rated supports | Cu, mica, LSZH | IEC 60331; BS 7846 | Circuit integrity depends on correct supports and glands |
| Aluminium conductor terminated onto copper bar | Bimetallic lug | Al barrel, Cu palm | IEC 61238-1 | Do not use standard copper lugs on aluminium conductors |
| Area lighting in a classified area | Ex-certified LED luminaire | Aluminium, SS316 | IEC 60079; IEC 60598 | Match gas group, temperature class and zone |
05 / CABLE VOLTAGE DROP CALCULATOR
Verify cable sizing and voltage drop limits before requesting a quote.
Voltage drop from current, length, conductor size, material and power factor, with the smallest size that stays within your limit.
ΔV = k × I × L × (R cosφ + X sinφ)
k = √3 (three-phase), 2 (single-phase); X ≈ 0.08 Ω/km
k = √3 (three-phase), 2 (single-phase); X ≈ 0.08 Ω/km
VOLTAGE DROP0.0V
VOLTAGE DROP AS % OF SUPPLY0.00%
RESULT AGAINST LIMIT—
SMALLEST SIZE WITHIN LIMIT (VOLTAGE DROP ONLY)—
A first-pass check only. It does not check current-carrying capacity, installation method, grouping, ambient temperature, short-circuit withstand or motor starting. Reactance is a typical value. Confirm against the project cable sizing calculation. Send the cable and accessories list for a quotation →
06 / ADNOC & SAUDI ARAMCO PROJECT SUPPLY
Compliant with ADNOC & Saudi Aramco project standards.
Major NOC and EPC projects define the certification, material, testing and vendor requirements. We work to those documents.
From MTO to a compliant quotation.
Before quoting, we check the enquiry against the documents that drive electrical compliance on NOC-linked projects.
- Material requisition, MTO, cable schedule and datasheet review
- Area classification, protection type, gas group, temperature class and zone
- Client and company specification requirements, including ADNOC and Saudi Aramco documents where the project calls for them
- Approved manufacturer or vendor list (AVL) requirements for the proposed source
- Fire performance, LSZH, material and coating clauses
Certificates that travel with the product.
Documentation follows the purchase order and the project specification, with clear traceability.
- ATEX or IECEx certificates and marking for Ex equipment
- Type-test, IP and cable routine test reports
- EN 10204 3.1 material certificates, and 3.2 where specified
- Third-party inspection coordination where the project requires it
- Packing list and shipping documents compiled for the client's records
Important: Gasify supports procurement against ADNOC, Saudi Aramco
and other client specifications. Product compliance, approved-source requirements and documentation are
reviewed for each project, and Gasify does not represent an approval or vendor-registration status.
07 / STANDARDS & CODES
Global certifications behind every order.
IEC 60079 · ATEX · IECEx
Explosion protection of electrical equipment, certified by notified bodies.
IEC 60529 · IEC 62262 · NEMA 250
IP, IK and NEMA enclosure ratings.
EN 62444 · BS 6121
Cable glands for electrical installations and hazardous areas.
IEC 61537 · NEMA VE 1
Cable tray and ladder systems and their load classification.
IEC 61386 · ANSI C80.1
Conduit systems for cable management.
IEC 60502-1 · BS 5467 · BS 6724
LV armoured cables, including LSZH.
IEC 60228
Conductor classes, sizes and resistance.
EN 50288
Multi-element cables for analogue and digital signals.
IEC 60332 · IEC 60331 · IEC 61034
Flame propagation, circuit integrity and smoke density.
IEC 61238-1 · DIN 46235
Compression and mechanical connectors and crimp lugs.
IEC 62305 · IEC 62561 · BS 7430
Lightning protection, component and earthing practice.
EN 10204 3.1 · Ex certificates
Material certificates, type-test reports and Ex certification.
08 / TESTING & DOCUMENTATION
Every certificate and test parameter confirmed before PO.
Tests and documents depend on the product standard, purchase order and applicable project specification.
Ex certificate verification
Check of ATEX or IECEx certificates, marking, schedule of limitations and special conditions against the area classification.
Type-test and IP reports
IP, IK, flame and temperature-rise type-test reports from the manufacturer for the delivered model.
Cable routine tests
Conductor resistance, high-voltage and insulation resistance tests on cable drums, with the test report per IEC 60502-1.
Material & coating checks
EN 10204 3.1 material certificates, galvanising thickness to ISO 1461 and stainless steel grade verification.
Dimensional & visual inspection
Gland threads, tray widths, enclosure dimensions, finish and marking against the order.
Inspection, packing & TPI
Third-party inspection coordination, drum and crate packing, and shipping documents.
09 / APPLICATIONS
Powering High-Stakes Operations.
Oil & gas hazardous areas
Ex-certified glands, junction boxes, luminaires and cables for Zone 1 and Zone 2.
Refining & petrochemical
Cable trays, cables, glands and enclosures for process and utility areas.
Offshore & marine
SS316 and GRP products, LSZH and fire-resistant cables.
Power generation
Cables, trays, earthing and lugs for power plant and substations.
LNG & cryogenic
Ex equipment and cables suited to cold service and terminals.
Water & desalination
Corrosion-resistant enclosures, trays and cables for water plants.
Industrial plants & skids
Junction boxes, cables and accessories for skids and packaged units.
Construction & infrastructure
Conduits, trays, cables and earthing for buildings and utilities.
10 / WHY GASIFY
Procurement accountability from specification to site handover.
- Quotation against a product list, with Ex protection, zone and thread left to the buyer
- Gland and enclosure certificates that do not match found at site
- Cables, glands, trays and lugs quoted separately
- Approved-source requirements discovered late in the process
- MTO and datasheets reviewed, with protection type, zone, thread and material matched before quotation
- Certificate, test report and TPI requirements aligned with the order
- Cables, glands, trays, enclosures and lugs consolidated in one package
- AVL and vendor requirements checked at quotation stage
11 / ELECTRICAL SUPPLIER IN THE UAE
Electrical accessories supplier and stockist in Abu Dhabi and Dubai.
Gasify Middle East Trading LLC is a UAE-based industrial supplier and stockist of electrical accessories, including cable glands, cable trays, conduits, junction boxes, cables, lugs and earthing materials. From offices in Abu Dhabi and Dubai we support EPC contractors, electrical contractors, skid packagers and plant procurement teams in oil and gas, petrochemical, refining, power generation, water and infrastructure.
Our electrical range covers industrial and Ex-certified cable glands to EN 62444 and IEC 60079, cable trays and ladders to IEC 61537, conduit systems to IEC 61386, junction boxes and enclosures, LV armoured cables to IEC 60502-1 and BS 5467, instrumentation cables, crimp and bimetallic lugs, and earthing and lightning protection components.
ADNOC electrical supplier and Saudi Aramco electrical supplier support
Projects in the UAE, Saudi Arabia and the wider GCC often reference ADNOC or Saudi Aramco specifications, approved manufacturer lists and inspection requirements. Gasify reviews these requirements against the products you need, coordinates the documentation called for by the order, and supports the RFQ from technical clarification to delivery. Approval status is never assumed. Requirements are confirmed against each project's documents.
Ex cable glands, junction boxes and hazardous-area equipment
Ex d and Ex e cable glands, Ex e and Ex i junction boxes, control stations, Ex LED luminaires and plugs and sockets are sourced to the area classification of the site: protection type, gas group, temperature class and zone. The gland and the enclosure must both be certified for the installation, and certificates are supplied by the manufacturer.
Cable trays, ladders, conduits and supports
Ladder, perforated and wire mesh trays and strut support systems are available in hot-dip galvanised steel, stainless steel 316, aluminium and GRP. Rigid, flexible and PVC conduits with fittings and Ex sealing fittings cover exposed wiring runs in industrial areas.
Power, control and instrumentation cables
LV XLPE/SWA cables in PVC and LSZH sheaths, fire-resistant cables, control cables and screened instrumentation cables are available in copper and aluminium conductors, on drums and cut to length on enquiry. Use the voltage drop calculator on this page for a first check of cable size.
Lugs, terminations, earthing and lightning protection
Crimp and bimetallic lugs, terminal blocks, heat-shrink sleeves, earth rods, copper tape, exothermic weld kits and lightning protection components complete the installation.
Electrical accessories with pipes, instruments and structural steel in one package
Electrical items rarely travel alone. Gasify can consolidate electrical accessories with instrumentation, structural steel, steel pipes, flanges and valves in a single package, with phased deliveries to the UAE, GCC, Middle East, Africa and South Asia. Explore how we work on our project supply page or read about oil and gas supply.
12 / FAQ
Electrical supply questions.
Are you an electrical accessories supplier and stockist in the UAE?
Gasify combines UAE-based supplier and stockist support with manufacturer sourcing. Availability depends on product, size, rating and quantity, so current stock is confirmed for each RFQ.
Can you supply electrical accessories to ADNOC and Saudi Aramco project specifications?
Gasify supports procurement against project material requisitions and client specifications, including ADNOC and Saudi Aramco requirements where the project calls for them. Approved manufacturer and vendor list requirements are reviewed for each project. Gasify does not represent an approval status unless it is formally documented.
Which electrical products do you supply?
The range covers cable glands and accessories, cable trays, ladders and supports, conduits and fittings, junction boxes and enclosures, power, control and instrumentation cables, lugs and terminations, earthing and lightning protection, and Ex-certified lighting and power accessories on enquiry.
What is the difference between Ex d and Ex e cable glands?
An Ex d gland is used with a flameproof enclosure and often has a barrier or compound seal that stops flame passing along the cable. An Ex e gland is used with increased-safety enclosures and seals against ingress. The gland must be certified for the protection type of the enclosure it enters.
What does an Ex marking such as Ex db eb IIC T6 Gb mean?
It lists the protection types (flameproof d, increased safety e), the gas group (IIC), the temperature class (T6, surface at or below 85 °C) and the equipment protection level (Gb, for Zone 1). Equipment must match the area classification of the site.
What do IP66 and IP68 mean?
The first digit shows protection against solids and the second shows protection against water. IP66 is dust-tight and withstands powerful water jets. IP68 is dust-tight and suitable for continuous immersion under conditions agreed with the manufacturer.
Should I choose a ladder tray or a perforated tray?
Ladder trays suit heavy power cables and long spans, and perforated trays suit medium loads and give support along the full cable length. Check the load and span against the tray manufacturer's load table, and select the finish for the environment.
Hot-dip galvanised, stainless steel or GRP for trays and enclosures?
Hot-dip galvanised steel suits most outdoor industrial areas. Stainless steel 316 and GRP suit coastal, offshore and chemical areas. The choice depends on the corrosivity category, the design life and the project specification.
What is the difference between PVC, LSZH and fire-resistant cable?
PVC cable is the standard general-purpose sheath. LSZH cable emits low smoke and no halogens in a fire, which suits enclosed spaces. Fire-resistant cable keeps the circuit working for a stated time in a fire under IEC 60331 or BS 7846. A cable can be LSZH and fire-resistant.
How do I size a cable for voltage drop?
Voltage drop depends on the current, length, conductor size and material, power factor and operating temperature. Use the voltage drop calculator on this page for a first check. Current rating, short-circuit withstand and installation conditions also decide the final size.
What tests and certificates come with the products?
Cables come with routine test reports, and metal products with EN 10204 3.1 material certificates. Ex products come with ATEX or IECEx certificates, and IP and type-test reports are available from the manufacturer. EN 10204 3.2 certification and third-party inspection can be coordinated where specified.
How do I request a quotation for electrical accessories?
Send your MTO, BOQ or datasheet with product type, size, rating, material, Ex protection and zone requirements, standard, quantity, required certificates and delivery location. The procurement team reviews the requirement and responds with a quotation.
Do you deliver outside the UAE?
Yes. Gasify coordinates delivery from the UAE to the GCC, wider Middle East, Africa and South Asia, subject to product, quantity, destination and logistics requirements. Include the delivery location in your RFQ.
13 / START A REQUIREMENT
Send your electrical list. We'll build the supply route.
Share your MTO, BOQ, cable schedule or datasheets with the delivery location. Our procurement team will review products, ratings and documentation, then coordinate sourcing, quotation and delivery.
PHONE / WHATSAPP+971 58 580 9068
SERVINGUAE · GCC · Middle East · Africa · South Asia
